Tools

 
Adapter fitting | Krontec lance to 3/8 NPT Alignment Bar Double Height Jack Stands GT3 Cup - Aluminum
Adapter fitting | Krontec lance to 3/8 NPTAlignment BarDouble Height Jack Stands GT3 Cup - Aluminum

Apadpter for Krontec Lance to 3/8 NPT

This adapter allows you to attach your Krontec lance to the Demon Speed hose, which has 3/8” NPT fittings.

The Demon Speed alignment bar allows you to see your toe measurement in one look.  No more going back and forth with a tape measure.

Aluminum jack stands.  Double height.

$23.00

$64.25

$1,499.00

Harris - Lincoln Motorsports Nitrogen Regulator, 600 PSI Hubstands Pro Plus Roller Ball Set Up Stands Krontec Air Lance
Harris - Lincoln Motorsports Nitrogen Regulator, 600 PSIHubstands Pro Plus Roller Ball Set Up StandsKrontec Air Lance

Regulator for air jack systems on the cup cars and others.

Complete Wheels-Free Set Ups. Corner Balance, Thrust, Caster, Camber and Toe; right at the Hubs and all at once.  Faster, Far More Precise. Item ships in 10 days.  

Air jack lance for the 991 cup and clubsport cars. 

$495.00

$2,445.00

$489.00

Krontec Lance Swivel only Nitrogen Bottle Cart Nitrogen Hose and Fittings for Air Jacks
Krontec Lance Swivel onlyNitrogen Bottle Cart Nitrogen Hose and Fittings for Air Jacks

Air jack lance swivel for the 991 cup and Club Sport cars. 

Made to fit the 80 and 125 scf nitrogen bottle sizes

This is the hose and fitting you need to run from your regulator to your air wand or lance for the air jack system.

$195.00

$375.00

$207.12

Paint Carrara Weiss B9A Paint Code Spray Can Shock Adjusting Hook Tool Shock Adjusting Hook Wrench Tool | 75mm and 65mm | Pair
Paint Carrara Weiss B9A Paint Code Spray CanShock Adjusting Hook Tool Shock Adjusting Hook Wrench Tool | 75mm and 65mm | Pair

Spray can of paint to match the factory Cup Car white.

PMNA tool for adjusting the shock collars for 996 and 997

996.450.633.90

DSM tool for adjusting the shock collars for 996, 997 and 991 Cup Cars These are the tools needed to adjust the collars of the Sachs shocks. The OD of the collars that these are made to adjust are 65mm and 75mm. The tools are made from stainless steel.

$27.68

$323.81

$228.00

$100.00

Staubli Lance Swivel only Staubli Socket (Lance with swivel) G3/8, Air Jack Staubli Socket (Lance without swivel) G3/8, Air Jack
Staubli Lance Swivel onlyStaubli Socket (Lance with swivel) G3/8, Air JackStaubli Socket (Lance without swivel) G3/8, Air Jack

Air jack lance swivel for the 997 cup cars. 

Air jack lance for the 997 cup cars. 

With swivel

Air jack lance for the 997 cup cars. 

$236.00

$819.50

$612.00

Travel Hold Down Wheel Washer - Porsche GT3 Cup 996/997.1 Wheel Nut Drive Tool Socket | RSR - Carrera GT - 991 Cup Nitrogen Transfer Hose and Gauge
Travel Hold Down Wheel Washer - Porsche GT3 Cup 996/997.1Wheel Nut Drive Tool Socket | RSR - Carrera GT - 991 CupNitrogen Transfer Hose and Gauge

Carbon Steel Zinc Plated

Sold as each

This is the wheel nut tool for the RSR, the Carrera GT, and the 991 Cup.

997.450.169.9B

With this setup, you are able to maintain a smaller nitrogen bottle for the airjacks and tires while keeping a larger bottle remote.

$97.50

$285.00

$198.00