6Cup - Late '03 - 5
|
|
|
| 1" Wheel Outer - BBS Motorsports - New | 1.5" Wheel Outer - BBS Motorsports - New | 8" Wheel Inner - BBS Motorsports - New |
1" Wide BBW Motorsports Wheel Outer 18" 24 Bolt | 1.5" Wide BBW Motorsports Wheel Outer 18" 24 Bolt | 8" Wide BBW Motorsports Wheel Inner 18" 24 Bolt
|
$260.00 | $260.00 | $430.00 |
| ||
| 9" Wheel Inner - BBS Motorsports - NEW | BBS Motorsports Wheel Bolts and Washers - 24 pc set | BBS Motorsports Wheel Seal O-Ring |
9" Wide BBW Motorsports Wheel Inner 18" 24 Bolt | 996 or 997 cup 24 bolt wheel hardware | 996 or 997 cup 24 bolt wheel sealing ring |
$490.00 | $21.95 | $36.00 |
|
|
|
| Demon Speed Rod End Boot | LCA Rubber End GT3 Style Control Arm Inner Section | Lower Control Arm Outer Section | Updated | Forged | Factory |
Rod end boots to protect rod ends from dirt and moisture | Inner contol arm section for Porsche GT3. This can also be used along with the Control Arm outer section to replace the one piece arms found on many Porsches. | Outer contol arm section for Porsche GT3. This can also be used along with the Control Arm inner section to replace the one piece arms found on many Porsches. |
$5.90 | $180.00 | $395.00 |
|
|
|
| Porsche 991 Cup Car Cover | Outdoor | Large Wing | Porsche GT3 Cup Wing Endplates 996 - 991 | Spoiler | Porsche 996 GT3 Cup | Street Quality |
Outdoor car cover for the 991 Cup Car. Cover has a rubberized nylon exterior with a cotton based. This keeps the car very protected. The cover has two straps to keep it secure to the car. Although this cover was designed to fit the 991 cup car,... | Carbon Fiber end plates for the original factory wing. Gloss carbon Fiber Sold as a pair. | Replaces 996.505.986.91 |
$295.00 | $80.00 | $195.00 |
|
|
|
| Rear Bumper - Porsche GT3 Cup 996 | Spoiler - Porsche 996 GT3 Cup | Wing Uprights - Porsche GT3 Cup 996 |
996 GT3 Cup Rear Fiberglass Bumper Excellent Reproduction! In STOCK! STORE WILL NOT CALCULATE FREIGHT | Porsche Motorsports Front Spoiler 996.505.986.91 Fits: All 996 GT3 Cup | 6 styles and heights to choose from. Fits: All 996 GT3 Cup and SP996 with Cup style decklid |
$850.00 | $800.00 | $300.00 |
|
|
|
| Brake Caliper Pad Retaining Bolts - Porsche GT3 996/997 | Front Brake Rotors - 996 Late GT3 Cup | Rear Brake Rotor - 996 GT3 Cup |
A Demonspeed exclusive! Custom replacement Front Brake Caliper Pad keeper bolts. Sold as a Pair. | Front Brake Rotors for the 996 GT3 Cup. Porsche Motorsports drilled rotors. | Porsche Rear Brake Rotors for the 996 GT3 Cup and others. |
$145.00 | $226.00 | $216.00 |
|
|
|
| Ignition Coil Beru 996/997/Boxster/Cayman/Cup | CSF Radiator Car Set - Porsche 996 Cup | Intake Boot - Porsche GT3 Cup 996 |
OEM Brand | Replaces OEM part# 99610603775, 99610613151 | Silicone Intake Boot for late 996 GT3 Cup. Intake Boot 996.110.621.93 |
$76.00 | $1,395.00 | $115.00 |
|
|
|
| Centerlock Wheel - Central Bolt - Porsche GT3 Cup 996/997.1 | Wheel Washer - Centerlock Wheels Porsche GT3 Cup 996 and 997.1 | Spoiler | Porsche 996 GT3 Cup | Race Quality |
Cup Centerlock Stub Axle Bolt. Porsche 996 and 997.1 GT3 Cup | Wheel Washer for the Motorsports Centerlock Wheel Fits: 964 993 996 and 997.1 Cup Cars with Centerlock Wheels Replaces part number 964.361.113.70 | Replaces 996.505.986.91 |
$125.00 | $112.00 | $165.00 |
|
|
|
| Motorsports Style Centerlock Conversion Package 996/997/986/987 | Porsche GT3 Cup 964 993 996 and 997 Centerlock wheels Lock Pot | Dash and Center Switch Panel - Porsche 996/997 GT3 Cup |
Full 996 / 997.1 style center lock conversion package. | Lock Pot for the center of the wheel hub for use with centerlock wheels. This part is for the 964 993 996 and the 997 Cup. Replaces 964.341.675.70 | Porsche Motorsports has made the decision to discontinue the Cup dash and center gauge panels. Demon Speed has created a new panel which replicates the original as closely as possible both with material and graphics. Whether you have a damaged... |
$2,924.00 | $161.00 | $130.00 |
|
|
|
| RSR Style Engine Mount Plate 993/996/997 GT3, Turbo, and Cup | Hood Pin - Porsche GT3 Cup 996/997.1 | Rear Adjustable Toe Links Non-Pinch Porsche 996/997/986/987 |
Fits 993 996 GT3, Turbo, Cup 997 GT3, Turbo, Cup | Hood pin for 993, 996 and 997.1 Cup 993.511.541.70 | Rear Adjustable Toe Links. Made from Aircraft Grade Aluminum, 3-piece precision Rod Ends with PTFE liners. |
$538.00 | $11.50 | $430.00 |
|
|
|
| Rear Adjustable Toe Links 986 / 996 / 987 / 997 | Solid Rear Subframe Bushings - Porsche 996/997 | Retractable Tow Hook 996 and 997 Cup Front or Rear |
Motorsports pinch style toe links | CNC Machined from 2024 aluminum and stainless steel. Full kit of 12 pcs. Lowers suspension by 12mm | Demon Speed Motorsports has created a replacement for the factory racing spring-retractable tow hook found on the 996 and 997 cup cars. |
$565.00 | $332.00 | $150.00 |
|
|
|
| Travel Hold Down Wheel Washer - Porsche GT3 Cup 996/997.1 | Front Adjustable Toe Links 996/997/986/987 Non-Pinch Style | Porsche 996/997 GT3 Turbo Billet Aluminum Coolant Pipe Fittings |
Carbon Steel Zinc Plated Sold as each | Front Adjustable Toe Links. Made from Aircraft Grade Aluminum, 3-piece precision Rod Ends with PTFE liners. | Weld in engine fittings. Full kit with extra fitings for all engine versions |
$115.00 | $374.00 | $225.00 |
|
|
|
| Hood Pin Disc - Porsche GT3 Cup 996/997/991 | PORSCHE 2001-2009 996/997 Axle Kit GT3/Turbo Track/Cup Upgrade | Porsche Fuel Filter - 99611025352 - Mahle KL 69 |
Hood Pin disk for hood or deck lid 991.151.154.38 | Demon Speed Exclusive High Speed Axles for racing and track. Created specifically for the rigors of the race track. | Fuel filter for the 996, 997, including the turbo, GT3 and Cup through 2009 Part Numbers: 4009026097595, 996 110 253 52, 996-110-253-52, 996-110-253-52-M67, 996.110.253.52, 99611025352, KL 69, KL-69, KL.69, KL69 |
$9.00 | $3,249.00 | $65.00 |
| ||
| Momo Mod7 996 Cup Steering Wheel | ||
Momo Mod7 Steering Wheel - The original and the best for the Cup Car | ||
$325.00 | ||
